Material prices

TMT Steel Price in Delhi NCR: Fe500 vs Fe550 Explained

By Homezzy Editorial···7 min read

Quick answer

TMT steel in Delhi NCR is usually quoted per tonne or per kilogram, with the final cost driven by grade, diameter, brand and delivered quantity. Fe500 and Fe550 differ in yield strength; Fe550 can allow smaller sections in some designs, but it should only be substituted when the structural drawing permits it. Compare quotes on the same grade and diameter, check the weight per metre, and ask for a mill test certificate and invoice. The cheapest per-tonne quote is not always cheapest if short lengths, wastage or delivery charges are excluded.

Fe500 and Fe550: what changes?

The number refers to nominal yield strength in MPa. Higher-grade steel can carry more load for the same area, which may reduce bar size in some designs. It is not a free upgrade: ductility, detailing and code requirements still govern the final design.

Never change grade or diameter on site without the structural engineer's approval. A substitution that looks harmless can change the behaviour of a beam or column.

How steel is priced and weighed

Steel quotes may be per tonne, per quintal or per kilogram. Normalise the quote to one unit and check the theoretical weight formula: weight in kg per metre is approximately D × D / 162, where D is diameter in millimetres. Bundles are often sold by theoretical weight, so confirm how short pieces and wastage are handled.

DiameterApprox. kg per metreCommon use
8 mm0.40Stirrups, links
10 mm0.62Slabs, stirrups
12 mm0.89Slabs, beams
16 mm1.58Beams, columns
20 mm2.47Columns, heavy work

Check quality before accepting delivery

Look for clear grade marking, straight bars, consistent ribs and a mill test certificate. Rusted, bent or badly stored steel can cause bond and handling problems even when the grade marking is correct.

Ask the supplier for a delivered quote to your exact area, including unloading. Steel is heavy, and handling charges can materially change the landed cost.

Frequently asked questions

Is Fe550 better than Fe500?

Fe550 has higher nominal yield strength, but it is better only where the design allows it. Follow the structural drawing and engineer's instruction.

How is TMT steel weight calculated?

Approximate weight in kg per metre is D × D / 162, where D is the diameter in millimetres. Confirm the method used in the supplier's quote.

What documents should I ask for?

Ask for a mill test certificate, grade marking, invoice and a clear delivered quote including unloading.

Put this guide into action

Check grade, diameter, unit and verified supplier.

Compare TMT steel listings →

Related guides